Fast View
Much
Art.: LS11942
Fast View
Much
Art.: LS11788
Fast View
Enough
Art.: RPS6491
The sensor signals danger if it detects a low-frequency signal (the sound of an impact) or a high-frequency signal (the sound of breaking glass). The low-frequency sound wave caused by the impact triggers the sensor to analyze the high-frequency channel
Analysis of the high frequency channel takes 4 seconds If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Analysis of the high frequency channel takes 4 seconds If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Fast View
Fast View
Enough
Art.: HMA0018
Fast View
Much
Art.: LS10970
Fast View
Enough
Art.: RPS18994
HY-SA20A high-quality installation for indoor monitoring, first-stage detection of visible smoke or fire
The smoke detector is designed for use in most homes, but is not suitable for use outside, outside the building or in high-rise buildings due to the possibility of a fire hazard not being sensed.
Attention! The device is intended for autonomous operation, it cannot work with alarm systems
The smoke detector is designed for use in most homes, but is not suitable for use outside, outside the building or in high-rise buildings due to the possibility of a fire hazard not being sensed.
Attention! The device is intended for autonomous operation, it cannot work with alarm systems
Fast View
Enough
Art.: RPS18148
ACMD-200 wireless carbon monoxide sensor that detects the dangerous concentration of this gas in the monitored room The digital temperature compensation mechanism allows working in a wide temperature range The ACMD-200 can operate automatically or as a two-way ABAX2 wireless system
Exceeding the threshold gas concentration is signaled by optical and acoustic signals It is recommended to install the device at least 1.5 ... 2.0 m above the floor
Exceeding the threshold gas concentration is signaled by optical and acoustic signals It is recommended to install the device at least 1.5 ... 2.0 m above the floor
Fast View
Enough
Art.: RPS15403
The digital temperature sensor DS-T2 is designed to work with SATEL brand devices that have a 1-wire bus (eg GPRS-A module).
The device can work both indoors and outdoors. The sensor is designed for flush mounting
The device complies with the IP65 sealing class
The device can work both indoors and outdoors. The sensor is designed for flush mounting
The device complies with the IP65 sealing class
Fast View
Much
Art.: PIP27771
Fast View
Much
Art.: PIP19279
Fast View
Much
Art.: LS12260
Fast View
Enough
Art.: LS11920
Fast View
Enough
Art.: RPS15391
A wireless smoke sensor whose task is to quickly detect an emerging fire In addition to transmitting information about the danger to the control panel, the detector MSD-350 can report about the danger with the help of an integrated buzzer
Fast View
Enough
Art.: RPS17660
Broken glass detector
DS-PDBG8-EG2-WE works with other devices compatible with HIKVISION AX PRO wireless system
DS-PDBG8-EG2-WE works with other devices compatible with HIKVISION AX PRO wireless system
Fast View
Enough
Art.: RPS15116
The wireless sensor AXD-200-DG is a multi-functional device that works in a two-way wireless ABAX 2/ABAX system that meets the requirements of EN 50131 Grade 2
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
Fast View
Much
Art.: LS12531
Fast View
Enough
Art.: PSD3553
The sensor signals danger if it detects a low-frequency signal (the sound of an impact) or a high-frequency signal (the sound of breaking glass). The low-frequency sound wave caused by the impact triggers the sensor to analyze the high-frequency channel
A flashing LED indicates that the microphone has captured the impact sound wave If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
A flashing LED indicates that the microphone has captured the impact sound wave If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Fast View
Much
Art.: LS12314
Fast View
Much
Art.: RPI30407